This is my chamberlain garage door opener. Some bad wiring here but this is what I got when I purchased the house last year. I used the two connections on the left and I can open the door with the app however, it will not close.
Any ideas?
Thanks,
Greg
Also, when the app does open the door the wall opener no longer works. In addition, the only status I get is stopped. The reflection is 98% so I am getting good light.
With reflection 98% and the threshold set to default 15, the app should report the door as closed.
Please confirm with the web interface.
When it comes to close command not working: do you happen to have a multi-meter?
With it, we can test if Garadget’s relay disengages after configured “On time”.
Yes, I have a multimeter. I set it to continuity. No continuity at rest. When I clicked the app to open the door it registered continuity for 30 seconds before releasing.
my settings are relay on time 0.2. Relay off time 0.3
I made each one of those setup changes however, it continues to have continuity for 30 seconds and then releasing.
Can you PM me the device ID so I can check that the settings got saved correctly.
Sorry I am so stupid but what is PM?
Personal message.
Just click on the profile icon and there will be a blue “message” button.
did you get the ID???
Yes, got the ID. Please reset the alert settings to default as well.
done
Thanks for helping me… Im not ready to give up on this device yet? I think it could really be cool if we can get it working correctly
It needs to release continuity after the door opens
We’ll get it working, no worries.
I’m not seeing the settings being reset to defaults.
Please make sure you’re using the web app and set each individual setting.
Oh, sorry I was using the mobile app
Ok, one last stupid question. How do I get to the web app? I promise no more dumb questions
Please don’t hesitate to ask any questions for as long as it’s needed to get your setup working right.
The web interface is at https://www.garadget.com/my/
Ok Denis. They are set.
Tried the continuity test again and it is still does not release for 30 seconds
