# Came Ver Openers **URL:** https://community.garadget.com/t/came-ver-openers/6304 **Category:** Wiring Openers **Tags:** opener, wiring **Created:** [October 16, 2019, 8:11pm UTC](https://community.garadget.com/t/came-ver-openers/6304 "2019-10-16T20:11:07Z") **Posts on this page:** 1 **Page:** 1
### Author: ![garadget](https://community.garadget.com/user_avatar/community.garadget.com/garadget/32/34_2.png) [@garadget](https://community.garadget.com/u/garadget) #### Post date: [October 16, 2019, 8:11pm UTC](https://community.garadget.com/t/came-ver-openers/6304/1 "2019-10-16T20:11:07Z")
Came Garage door operator Series VER is connected with Garadget via terminals labeled 7 & 2. ![image](https://community.garadget.com/uploads/default/original/2X/7/72e84884d5363b973e580d21065dcec7caa156a2.png) The programming of the opener may need to be adjusted for correct operation: F7 (Control mode on 2-7) The control device connected to 2-7, performs the (open-close-invert) stepstep, (open-stop-close-stop), sequential, open only or close only 0 = Step-step (default) / 1 = Sequential / 2 = Open / 3 = Close The manual can be found [here](https://docs.came.com/pdf/FA01176-EN.pdf?1571256000)