# Garadget will only work once

**URL:** <https://community.garadget.com/t/garadget-will-only-work-once/4814>\
**Category:** Wiring Openers\
**Created:** [November 18, 2018, 9:45pm UTC](https://community.garadget.com/t/garadget-will-only-work-once/4814 "2018-11-18T21:45:37Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![garadget](https://community.garadget.com/user_avatar/community.garadget.com/garadget/32/34_2.png) [@garadget](https://community.garadget.com/u/garadget)\
**Post date:** [November 19, 2018, 6:10am UTC](https://community.garadget.com/t/garadget-will-only-work-once/4814/2 "2018-11-19T06:10:48Z")

</div>

Steve,  
Immediately after the new command files, are you still able to use the wall button?  
This could be the case of sticking relay:

> [@Relay sticking?](https://community.garadget.com/t/relay-sticking/2604):
>
> I am having a problem with new device. The door stops working with the opener light blinking even with the wall switch. I have read that others have had the same problem with over head door model 555. I put a meter on it while in the nonworking mode and it shows a short. It remains a short even with the power removed. The relay will return to the normally open state in a few minutes. Can you tell me if the relays or analog or are they solid state?

---

_[View the full topic](https://community.garadget.com/t/garadget-will-only-work-once/4814)._