# Myq, garadget, gates, dilemma
**URL:** https://community.garadget.com/t/myq-garadget-gates-dilemma/9128
**Category:** Garage Talk
**Created:** [November 20, 2022, 4:10am UTC](https://community.garadget.com/t/myq-garadget-gates-dilemma/9128 "2022-11-20T04:10:12Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@Asv4k8](https://community.garadget.com/u/Asv4k8)
#### Post date: [November 20, 2022, 4:10am UTC](https://community.garadget.com/t/myq-garadget-gates-dilemma/9128/1 "2022-11-20T04:10:12Z")
So this is kind of the opposite of the garadget application but I figured I’d ask here…
I have 2 lift master garage doors with myq. I would like to add my sliding driveway gate to the 3rd button on that opener but my gate opener uses a different frequency…
I want to add a myq receiver of some sort so the liftmaster remote works, and I can use the myq app.
Ideally I’d just run a liftmaster gate opener but I already have a opener and the liftmaster units for sliding gates are too expensive.
I am looking at this: Limited-time deal: myQ Chamberlain Smart Garage Control - Wireless Garage Hub and Sensor with Wifi & Bluetooth - Smartphone Controlled, myQ-G0401-ES, White [https://a.co/d/c7ix7Ss](https://a.co/d/c7ix7Ss)
… But that looks like it interfaces by sending a wireless signal like a remote would (I need a myq receiver that will trigger a relay).
Anyone have suggestions?
---
### Author:  [@Jim\_Carlson](https://community.garadget.com/u/Jim_Carlson)
#### Post date: [February 27, 2023, 10:18pm UTC](https://community.garadget.com/t/myq-garadget-gates-dilemma/9128/2 "2023-02-27T22:18:32Z")
I need something like this also. I have a MyQ that will not interface to my opener. I want the MyQ to talk to a Garadget that will close contacts that open the door