# Securalift GDO-7 V1

**URL:** https://community.garadget.com/t/securalift-gdo-7-v1/4591
**Category:** Wiring Openers
**Tags:** opener, wiring, gdo
**Created:** [October 15, 2018, 1:45am UTC](https://community.garadget.com/t/securalift-gdo-7-v1/4591 "2018-10-15T01:45:07Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![Willdut](https://community.garadget.com/letter_avatar_proxy/v4/letter/w/db5fbb/32.png) [@Willdut](https://community.garadget.com/u/Willdut)
#### Post date: [October 15, 2018, 1:45am UTC](https://community.garadget.com/t/securalift-gdo-7-v1/4591/1 "2018-10-15T01:45:07Z")

</div>

Hi, I have a Securalift GDO-7 V1

 ![20181015_105423](https://community.garadget.com/uploads/default/original/2X/7/7a7faffd0e0ba13a123535cfc59f7cef210ae76c.jpeg)

Has PROG/  
P.E / Com-Osc-Lgt-Pe-Ov-24V terminals which terminals would I use.

Thanks Bill

---

<div class="post-metadata">

### Author: ![garadget](https://community.garadget.com/user_avatar/community.garadget.com/garadget/32/34_2.png) [@garadget](https://community.garadget.com/u/garadget)
#### Post date: [October 15, 2018, 4:02pm UTC](https://community.garadget.com/t/securalift-gdo-7-v1/4591/2 "2018-10-15T16:02:05Z")

</div>

OSC (Open/Stop/Close) and Comm (Common).

---

<div class="post-metadata">

### Author: ![Willdut](https://community.garadget.com/letter_avatar_proxy/v4/letter/w/db5fbb/32.png) [@Willdut](https://community.garadget.com/u/Willdut)
#### Post date: [October 16, 2018, 12:50am UTC](https://community.garadget.com/t/securalift-gdo-7-v1/4591/3 "2018-10-16T00:50:00Z")

</div>

Thanks for your fast response

regards Bill

---

<div class="post-metadata">

### Author: ![stevecroat](https://community.garadget.com/letter_avatar_proxy/v4/letter/s/f05b48/32.png) [@stevecroat](https://community.garadget.com/u/stevecroat)
#### Post date: [August 30, 2022, 11:11am UTC](https://community.garadget.com/t/securalift-gdo-7-v1/4591/4 "2022-08-30T11:11:29Z")

</div>

I also have a Securalift GDO-7 V1, and trying to connect a Remootio 2, and it states that I connect to the OSC and OV pins, but how do i connect the wires to them - do I remove the orange pins?

---

<div class="post-metadata">

### Author: ![garadget](https://community.garadget.com/user_avatar/community.garadget.com/garadget/32/34_2.png) [@garadget](https://community.garadget.com/u/garadget)
#### Post date: [August 30, 2022, 4:58pm UTC](https://community.garadget.com/t/securalift-gdo-7-v1/4591/5 "2022-08-30T16:58:32Z")

</div>

You press the orange tabs to release/open the corresponding terminal.

---

<div class="post-metadata">

### Author: ![stevecroat](https://community.garadget.com/letter_avatar_proxy/v4/letter/s/f05b48/32.png) [@stevecroat](https://community.garadget.com/u/stevecroat)
#### Post date: [September 1, 2022, 8:19am UTC](https://community.garadget.com/t/securalift-gdo-7-v1/4591/6 "2022-09-01T08:19:25Z")

</div>

Thanks so much!