# Wiring Avanti MPS 12

**URL:** https://community.garadget.com/t/wiring-avanti-mps-12/1656
**Category:** Wiring Openers
**Tags:** wiring, opener, avanti
**Created:** [March 30, 2017, 4:40am UTC](https://community.garadget.com/t/wiring-avanti-mps-12/1656 "2017-03-30T04:40:15Z")
**Posts on this page:** 1
**Showing post:** 4

<div class="post-metadata">

### Author: ![Milovasic](https://community.garadget.com/letter_avatar_proxy/v4/letter/m/c37758/32.png) [@Milovasic](https://community.garadget.com/u/Milovasic)
#### Post date: [March 31, 2017, 2:13am UTC](https://community.garadget.com/t/wiring-avanti-mps-12/1656/4 "2017-03-31T02:13:46Z")

</div>

I now seem to be getting very low reflective states from door closed, during the day. Night seems quite reasonable and high  
Currently at so will have to check laser alignment when I get home  
Reflection is at about 6. Door open goes to the neighbors wall… gives 0 reflection  
(oops might have to look into that … )

My garage has no windows, only light would be from the top of garage etc.  
No where near as much as.

> [@Improving the sensor's reliability](http://community.garadget.com/t/improving-the-sensors-reliability/86/28):
>
> Here you go…

Is this perhaps a scenario where my garadget unit could do with a light protective shroud?  
(given reflective sticker is still correctly in place etc)

---

_[View the full topic](https://community.garadget.com/t/wiring-avanti-mps-12/1656)._