# \#merlin

**URL:** https://community.garadget.com/tag/merlin/48.md

[Latest](https://community.garadget.com/latest.md) · [Categories](https://community.garadget.com/categories.md) · [Tags](https://community.garadget.com/tags.md)

---

## [Old School Merlin Power lift model 2500L](https://community.garadget.com/t/old-school-merlin-power-lift-model-2500l/1046)

<div class="topic-metadata">

**Author:** [@Oldschool](https://community.garadget.com/u/Oldschool)\
**Replies:** 7\
**Last updated:** [May 6, 2021, 3:21pm UTC](https://community.garadget.com/t/old-school-merlin-power-lift-model-2500l/1046 "2021-05-06T15:21:41Z")

</div>

Any idea how I wire up this old school Merlin power lift? I don’t even know where to start. …

---

## [Installation with Merlin Profit 230T](https://community.garadget.com/t/installation-with-merlin-profit-230t/252)

<div class="topic-metadata">

**Author:** [@Papa007](https://community.garadget.com/u/Papa007)\
**Replies:** 1\
**Last updated:** [April 19, 2019, 6:58am UTC](https://community.garadget.com/t/installation-with-merlin-profit-230t/252 "2019-04-19T06:58:06Z")

</div>

Heres a pic of the Garadget installed this morning. Took a while to find the right spot as the LED was shining straight in my neighbours front door when the door was opened. All sorted now. Also the Merlin only allows …

---

## [Merlin MT100EVO, Cyclone PRO MT120EVO](https://community.garadget.com/t/merlin-mt100evo-cyclone-pro-mt120evo/4194)

<div class="topic-metadata">

**Author:** [@garadget](https://community.garadget.com/u/garadget)\
**Replies:** 0\
**Last updated:** [July 10, 2018, 3:08pm UTC](https://community.garadget.com/t/merlin-mt100evo-cyclone-pro-mt120evo/4194 "2018-07-10T15:08:01Z")

</div>

Garadget is connected to inputs Push Button (Dry Contact input for push button wired wall controls, number 1) and Ground (Common terminal for push button, number 2) on the terminal block of the garage door opener. …

---

## [Merlin MR850/MR650 Rolling Garage Door Opener](https://community.garadget.com/t/merlin-mr850-mr650-rolling-garage-door-opener/5084)

<div class="topic-metadata">

**Author:** [@garadget](https://community.garadget.com/u/garadget)\
**Replies:** 0\
**Last updated:** [December 30, 2018, 6:11am UTC](https://community.garadget.com/t/merlin-mr850-mr650-rolling-garage-door-opener/5084 "2018-12-30T06:11:12Z")

</div>

Garadget connects to Merlin MR850/MR650 Rolling Garage Door Opener via terminals #1 & #2 as highlighted below:

---

## [Merling MT800](https://community.garadget.com/t/merling-mt800/4837)

<div class="topic-metadata">

**Author:** [@garadget](https://community.garadget.com/u/garadget)\
**Replies:** 0\
**Last updated:** [November 22, 2018, 12:57am UTC](https://community.garadget.com/t/merling-mt800/4837 "2018-11-22T00:57:29Z")

</div>

Merlin MT800 Sectional and Tilt Garage Door Opener Garadget connects to the opener terminals as shown here: Installation and Operating Instructions can be found here

---

## [Merlin MT5580P](https://community.garadget.com/t/merlin-mt5580p/4257)

<div class="topic-metadata">

**Author:** [@garadget](https://community.garadget.com/u/garadget)\
**Replies:** 0\
**Last updated:** [July 28, 2018, 3:12pm UTC](https://community.garadget.com/t/merlin-mt5580p/4257 "2018-07-28T15:12:15Z")

</div>

Merlin MT5580P is connected with Garadget using white and red terminals (two on the left). The installation manual can be found here.

---

## [Merlin MT3850](https://community.garadget.com/t/merlin-mt3850/3968)

<div class="topic-metadata">

**Author:** [@garadget](https://community.garadget.com/u/garadget)\
**Replies:** 0\
**Last updated:** [April 29, 2018, 5:07am UTC](https://community.garadget.com/t/merlin-mt3850/3968 "2018-04-29T05:07:40Z")

</div>