Hi Phillip.
I don’t have a picture handy, but I do have a description of my wiring setup. (I’ll grab some pictures as soon as I can).
Here’s how I have mine connected:
Genie wall control inside garage --> wires running along ceiling --> garage door opener connectors (on the actual Genie device).
A NEW set of wires starting from the “OPENER” side of dry contact adapter --> garage door opener connectors. (Yes, they are sharing the same spot as the wall mounted unit wires described in previous step).
The black wire shown in my picture way above is the wiring coming out of the “OPENER” port on my adapter.
Now, starting from the “SWITCH” ports on dry contact adapter --> Garadget provided set of wires --> my Garadget. 
Referring to the picture way above again, the black-n-white wire on the left side is running down to my Garadget device.
I hope this helps. I’ll get some pictures on here soon. (I’ve had a couple people PM me about this before, so I should have taken the hint 
)