Either MQTT support or even just HTTP calls would be an excellent start as well.
1 Like
HTTP is losing to MQTT as an early cloud-less option because it
- is a much heavier implementation
- needs protocol on top of it which all involved devices will have to support (like REST with specific endpoints and parameters)
- not optimal for communicating asynchronous events from both client and device
- comes with serious security implications
However, MQTT requires a broker. It can be a home automation hub, Raspberry PI or NAS. Without a broker the mobile phone apps and other clients on LAN will not be able to talk to Garadget. This will be an issue to address next.
Hi,
I understand cloud is must-have for remote access but remote access is not a must-have for me. Security is. It should be possible to disable cloud access and have the doors be LAN controllable only. As for the protocol, please use something that does not require yet another device. My Yi dome camera works great on my LAN without any additional devices. Cloud access for that device is optional.
Thank you!
Another vote for a confirmation in the app to open or close to prevent accidental actions.
Also alexa please.
the ability to have more than one user. each user should be able to set their own alert preferences.
4 Likes
I’m not quite ready to add the garage door opener to my home automation set up yet, but it’s near the top of the list. I’ve made a very concerted effort to keep as many of my device integrations local as possible. Right now I’m torn between the Garadget (cooler piece of hardware) or the Linear (local control via Zwave). If you can add an MQTT solution that would make the decision very easy.
@gomanual,
Linear is a fine piece of hardware, and if you’re heavily invested in the z-wave modules, I understand why it would be a reasonable choice.
Unlike z-wave module, Garadget can be used as both home automation module and as stand-alone appliance. It is especially great choice as the first home automation product that can later play nicely with the home automation hubs if needed.
A developer is working on MQTT protocol implementation for Garadget. This feature is high on the list and it will become available eventually one way or the other. For now you can find assurance in the fact that Garadget is an open source product riding on a reliable cloud platform and that you own the hardware - you can re-program it, replace firmware etc.
Would love to see this incorporated into apple’s CarPlay. Having the control on my car’s touch screen would be fantastic.
1 Like
Hi gomanual - I have zwave and looked into the Liner hardware to operate the door. After reading the posts in alarm forums with so many issues operationally I looked for another solution and found garadget. Couldn’t be happier! trying alexa this weekend.
1 Like
Not sure if this is covered above but I’d like to be able to put in more than one email address for alerts.
1 Like
I would like to have the option to open partially based on either time, or reed switch location. With partial opening I could consider using this as a pet door.
1 Like
Fingerprint security login option to the app
4 Likes
Would adding Garadget to Stringify be a possibility? I’ve found it to be more flexible than IFTTT in setting up home automation.
1 Like
Nevermind, Stringify (through Smartthings) seems to work after I had my unit replaced.
“OK Google, is my garage door open?”
Garadget gives status of door to Google Assistant via IFTTT ??
“Your garage door was opened 15 minutes ago.” etc.??
That would be awesome. Thanks.
5 Likes
I would like to see an IFTTT trigger for “time out alert”.
That is, I want IFTTT to be triggered when the door as been open for xx minutes when the “time out alert” setting has been met. I get the alert now on my phone, but I am looking to use IFTTT to turn on a smartswitch using IFTTT.
I could then use the existing IFTTT trigger for the garadget door close to turn off the smartswitch.
1 Like
A few changes needed for the iOS app. Enable fingerprint security to open /login to app. Add a conformation for operating the door. Having three doors set up on the app i need to switch between doors and occasionally open a door when not intending to.
Also include larger square reflector tape with each unit. With vibration and general movement of things a larger target is desired.
Great product! The basic features of your product are EXACTLY what I have been looking for.
5 Likes
Yeah, fingerprint authentication for android would be welcome.
3 Likes
I would like to see the night alert have the option to adjust to local sunset/sunrise time. Having the door open at 8pm during the middle of winter may be unexpected, but its still daylight in the middle of summer at 8pm.
2 Likes